Sale!

BIQU 3D Printer Ramps 1.6 Ramps 1.5 1.4 controller Reprap Mendel with 3D printers A4988 DRV8825 TMC2130 for 3d printer parts

Original price was: $4.98.Current price is: $4.68.

SKU: 32822182358 Categories: ,

Description

USD 15.96-40.50/pieceUSD 22.58/pieceUSD 8.45/pieceUSD 7.99-34.54/pieceUSD 8.23-31.06/pieceUSD 4.68-32.81/pieceUSD 15.54-35.96/pieceUSD 19.52-44.78/piece

About Ramps 1.5

Ramps 1.5 is optimized and launched based on RAMPS1.4 by Biqu

We change the original plug-in MOS tube to patch-type MOS tube in order to solve the problem of plug-in MOS tube easy to break,take up a large area, poor heat dissipation , which can improve the stability and aesthetics of the board.

The features of multiple extended interface and replaceable parts make RAMPS1.5 become a control board with powerful upgrade capability and scalable modularity.

The controller board can be used when the pins on the back of the board are connected to the Arduino Mega and the front is connected to stepper motor drives.

Support motor drivers: support A4988 DRV8825 TMC2100 and other motor drivers(support five motor drivers Simultaneously)

Product Features

1,It can be connected to LCD and other parts.

2,There are heater and fan MOSFET outputs and 3 thermistor interfaces 3,5A additional security and component protection fusion 4,Heated bed controls additional 11A fuses 5,Applied to 5 Pololu stepper drive board 6,Design of Pololu plate pin socket can be easily replaced or removed for future design 7,I2C and SPI pins are available for future expansion 8,Servo connectors are used for connecting limit stops, motors and light-emitting diodes. These connectors are gold-plated and have a rated current of 3A, which is very compact. 9,The LED will light when the heater has output 10,Support 2 motors to connect to Z Prusa Mendel About Ramps 1.6

Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5 by Biqu .The Struture almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors,which more simple and convenient to connect,also will not be burnt easily,what’s more ,Ramps 1.6 have a good Heatsink above MOS tube in order to give a better function to heat dissipation .

Beside, the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W , and Ramps 1.5 just can be up to 200W, or samller than 200W

Notice : Our real upgrade, Ramps 1.6 has four layers

Q: Why choose our ramps 1.6 type contorller board ?

A : You can check the different with the three-dimensional diagram.Our ramps 1.6 have 4 layer .A high quality ramps 1.6 effect more than 10pcs cheaper copy board .

Type 1: Ramps 1.5 only

Type 2:Ramps 1.5 + 4pcs A4988(Red color)

Type 3:Ramps 1.5 + 4pcs A4988 ( Green color)

Type 4:Ramps 1.5+4 PCS DRV8825

Type 5:Ramps 1.6

Type 6:Ramps 1.6+4PCS TMC2130 V1.1

​ Type 7: Ramps 1.4

Type 1: Ramps 1.5 only

Ramps 1.5 detial:

Type 5:Ramps 1.6

Type 6 :Ramps 1.6 with TMC2130 V1.1 stepper motor driver

Additional information

Weight 0.15 kg
Dimensions 12 × 12 × 12 cm
Item Type

Motherboard

Brand Name

BIQU

Model Number

ZZB000059

Name

BIQU Ramps 1.6/1.5/1.4

Color

Blue

Place of origin

China

Fit to

kossel ultimaker 2

Dimensions

101.5 * 60.5mm

Function

3d printer mother board

support

A4988/Dr8825/TMC2130V1.1

conditon

New