Assembled Peek J-head hotend long-distance bowden extruder 0.3/0.35/0.4/0.5mm nozzle +75cm cable for 3mm 3D filament

Description

USD 28.90/pieceUSD 168.00/pieceUSD 80.00/pieceUSD 168.00/pieceUSD 150.00/pieceUSD 96.00/pieceUSD 45.00/piece

J-head hotend assembled long-distance bowden extruder 0.3/0.35/0.4/0.5mm nozzle +75cm cable for 1.75/3mm reprap 3d printer

Nozzle diameter: 0.3mm,0.35mm,0.4mm, 0.5mm optional. Feed inlet diameter : 1.75mm 3mm diameter PLA optional. Please leave us a message which size do you want about Nozzle diameter and Feed inlet diameter when you order, otherwrise we will ship the 0.3mm Nozzle and 3mm Feed inlet diameter as default Description:

The Bowden cable lets you reduce the moving mass of the extruder and thus allowing faster controlled motion, less shaking of your machine, less energy use and importantly: faster printing! Normally the mechanism that drives the filament into the hot end (where it melts) is directly on top of the extruder. This creates problems of balance and oscillations with faster motion which you can see in your printing results and hear and feel when your machine is shaking.

The concept of using a Bowden cable as guide was suggested and pioneered by Ed Sells.If the filament drive mechanism is placed on a non-moving part of the 3D printer, it can be pushed into a tube. PTFE (Teflon) is useful because it is slippery: it has little friction with the plastic.This limits wear and loss of energy. The tube’s other end is connected to the extruder’s hot-end.

Features:

The inner diameter of the bowden feed mouth is 4mm to print with 1.75mm filament,and 6mm to print with 3mm filament.It is assembled with 12V 30W Cartridge heater and 100K NTC thermistor.

Cartridge heater

Materail: Stainless Steel,PVC, Nylon

Voltage: 12V

Power: 30w

Wire Length :1m

Heater size: 6 x 15mm(D*L)

Package list:

1 x Assembled J-Head HotEnd With 75cm cables

2pcs MK8 Extruder 3D Printer j-head Makerbot 0.3/0.35/0.4/0.5mm e3d nozzle for 1.75mm/3mm filament free shipping US$ 109.90/lot pieces / lot

5pcs/lot Reprap Stepper Driver pololu A4988 stepper motor driver module with aluminum heat sink for ramps 1.4 3D printer US$ 7.75/lot pieces / lot

Geeetech Full Kit Black Color Acrylic Frame I3 3D Printer Reprap Pursa Desktop Sanguinololu control board US$ 520.99/piece

Geeetech 2014 Newest Assembled Me Creator Mini Desktop 3D Printer MK8 extruder Sanguinololu V1.3a Shipped By Express US$ 485.00/piece

Reprap 3D Printer Peek J-head V2.0 hotend Short-distance For extruder with cable 0.3/0.35/0.4/0.5mm nozzle 1.75/3mm filament US$ 30.00/piece

1M PTFE Tube Teflon PiPe to J-head hotend RepRap Rostock Bowden Extruderfor 1.75mm/3mm filament ID 2mm/4mm OD 4mm/6mm US$ 4.50/piece

5pcs Peek MK4 MKIV J-Head Hotend Teflon tube/Guide tube RepRap 3D Printer 0.3/0.35/0.4/0.5mm extruder nozzle 1.75mm filamnet US$ 125.00/lot pieces / lot

Free shipping DHT11 digital temperature and Relative Humidity breakout sensor module US$ 5.99/piece