BIQU MINI UPS_V1.0 Power off resume print model suitable for 3.5/2.8/3.2 inch touch screen 3d control board as 3d printer parts


SKU: 32931144924 Categories: ,


USD 35.90-66.50/pieceUSD 18.79/pieceUSD 8.45/pieceUSD 15.54-35.96/pieceUSD 21.50/pieceUSD 19.52-44.78/pieceUSD 45.48/pieceUSD 39.77/piece

Product name: MINI UPS_V1.0


This module can be used with the 3D printer motherboard specified by BIQU,it can achieve the functions of resume printing while power off accidentally,monitoring power status ,etc.,and realize printing interaction.When the accidental power failure is ensured, the 3D printing system can completely save the printed data, which can effectively solve the adverse effect of the power failure on the printed parts, and is one of the more practical functions of the 3D printer.

Electrical parameters:

Working voltage: 12V, maximum current: 25A

The power-off detection port outputs a low level when it is working normally, and outputs a high level when it is powered off.


1.It can only work normally at 12V voltage. When the working voltage is higher than 13V, the module will burn out. When the working voltage is lower than 10V, the module will output the power-off signal.

2.Do not reverse the positive or negative, otherwise it will burn the module.

Instruction manual:

For atmega2560 and other chips operating at 5V motherboard (for example: GEN_V1.0, KFB3.0), the module’s toggle switch is set to 5V, for lpc1768 and other chips operating voltage of 3.3V motherboard (example :MKS SBase), turn the toggle switch to 3.3V.

Marlin modified tutorial:

Step 1: Download our matching marlin firmware. The firmware we provided is modified based on Marlin 1.1.8, which adding the function of resume printing after power off.

Step 2: The default configuration of the firmware is our Plus Delta printer. If it is our Plus machine, you can update the firmware directly to the motherboard without modification. If it is another model, you need to modify the corresponding Configuration.h and Configuration_adv.h configuration files according to the specific model.

Step 3: Locate the biqu.h file. If the power-off detection port is plugged into the Y_Min port of the motherboard, turn on YMIN_PLUG as shown in Figure 1, and set the POWER_FAILED_PIN port to Y_MIN_PIN.

Ports such as X_Min, X_Max, Y_Min, Y_Max, Z_Min, and Z_Max can be used. When inserting different ports, only



These two sentences can be modified accordingly.

Type 1 : 1PCS Power off resume print model MINI UPS_V1.0

Type 2: 2PCS Power off resume print model MINI UPS_V1.0

Additional information

Weight 0.08 kg
Dimensions 10 × 10 × 10 cm
Item Type


Brand Name


Model Number

MINI UPS_V1.0 Module

Product name

Power off resume print model



Maximum Current


Support LCD

TFT3.2/TFT 3.5/TFT 2.8 Touch screen

Suit for

GEN_V1.0, KFB3.0, MKS SBase, MKS GEN V 1.4 and other


Continue Printing After Power Off

Place Of Origin

Guangdong, China (Mainland)


3d printer parts